Category: Burner control
Availability: 4 - 8 weeks
Tags: Burner, Control, sequencer, automatic
The Elcontrol 3030 multi spark ingiter unit, is a well proven solution for a number of applications, but mainly used in the food manufacturing industry. The 3030 have been used for many years by some of the main manufacturers for biscuits and bread around the world.
The igniter unit provides energising current for up to 60 ignition coils, each coil firing one ignition electrode. The unit contains two identical circuits each capable of energising 30 coils. The two circuits fire alternately on each half of the mains cycle. The equipment will survive being operated with a short circuit on each channel output. The unit will provide correct performance on one channel with a permanent short circuit on the output of the other channel.
A check facility is available on each channel initiated by a signal derived from an ignition coil primary. Deriving the signal from the last coil indicates continuity of wiring to that coil. The check facility provides power via an SCR to operate external alarm equipment or an internal relay.
|Power supply:||110 AC, 240V AC|
|Max Temp:||100 Deg C with no relays|
|Number of Channels:||2|
|Ignition Coils per channel:||30|
|Total No of Ignition Coils:||60|
|Minimum secondary voltage:||with 30 coils fitted: 10 kV|
|Check facility output power:||50 VA max.|
|Check facility relay:||1 open-circuit fault output - 1 short-circuit fault output(per channel)|
|Dimensions:||300mm x 200mm x 150mm|
|Enclosure:||Powder Coated steel, IP67 rated|