IECEx CERTIFIED IIB FLAME SCANNER

ATEX, IECEx certified Flame Scanner

  • The UVH6/FP/MK1 provides visual non-contact flame sensing by detecting ultra violet radiation from the flame under supervision. The unit is self-checking in operation by virtue of a rotating disc driving by a synchronous motor.

 


Part Number: UVH6/FP/MK1

Category:Hazardous area ATEX

Availability: 4 - 8 weeks

Tags: Enclosure, ATEX

PRODUCT DESCRIPTION

The UVH6/FP/MK1 is a robust TRUE UV flame scanner that has 30 years of reliable service.

The UVH6/FP/MK1 provides visual non-contact flame sensing by detecting ultra violet radiation from the flame under supervision. The unit is self-checking in operation by virtue of a rotating disc driving by a synchronous motor.

The UVH6/FP/MK1 needs to be used with the appropriate flame amplifier / relay which can be located within the classified area (see UVH6/FP/AMP series) or remotely mounted outside the flameproof zone (see GP320, GP320EURO or GP420 series)

Variation on the standard unit are available upon request.

FEATURES
  • ATEX Approval – Certificate No. Baseefa02ATEX0050X
  • IECEx Approval – Certificate No. IECEx BAS 16.0079X
  • Supply voltages 50V, 110V, 220V or 240V ac. Others to special order.
  • Synthetic Quartz lens option for increased sensitivity.
  • UV Spectral response 190-270 nm.
  • Continuous self-checking operation.
  • Easy internal access for connection and maintenance.
  • Standard mounting via 2½” BSP cap nut.
  • Operating temperature limits –20°C to +60°C.
  • Compliance with Essential Health and Safety Requirements: IEC60079-0 & IEC60079-1

  • • Standard (MK1) version described above. Other variants available:
    • MK2: As MK1 but not self-checking (no beam chopper disk)
    • MK3: As MK1 but not self-checking and low voltage UV cell.
    • MK1/4: As MK1 but with visible light back-up cell (chopped)
    • MK1/5: As MK1 but with infra-red flicker back-up cell (unchopped)

     

APPLICATIONS
  • Suitable for use in potentially hazardous atmospheres above ground
  • Suitable for use with equipment in areas with gases up to IIB specified
CERTIFICATION INFORMATION

ATEX Approval – Certificate No. Baseefa02ATEX0050X

IECEx Approval – Certificate No. IECEx BAS 16.0079X

Compliance with Essential Health and Safety Requirements: IEC60079-0 & IEC60079-1

NOTE: When used in accordance with manufacturers instructions, the UVH6/FP enclosure has a certified Ingress Protection rating of IP66.

 

Additional details

Documentation

Data Sheet